LC/MS/MS Analysis of Propoxyphene from urine using Strata-X-Drug B on a Kinetex C18 2.6µm, 50x2.1mm

Sample Preparation Details

Part No:8B-S128-UCH
Solid Phase Extraction (SPE) procedure:Note: The solvent volumes shown below are for a 60 mg bed mass. The solvent volumes will need to be adjusted for a smaller or larger bed mass.
Load:To 2mL urine, add 2mLs of 100mM sodium acetate buffer with I.S. (300ng/mL). Make sure pH should is ~4.0-6.0. Load pre-treated sample directly onto SPE cartridge. NO CONDITIONING REQUIRED
Dry:10 minutes @ full vacuum
Final Prep and Analysis: Evaporate to dryness under a stream of nitrogen at 50 C . Reconstitute in 1 mL of 40% acetonitrile. Inject: 2.5 µL on HPLC / Mass Spectrometer (MS) @ amu (ambient)


Name Spiked
Log P pKa % Rec %RSC (n=0)
1 Propoxyphene-d11 300  100 0.001
2 Propoxyphene 300  99.21 1.95

Application Detail (App ID: 19704)

Part No:00B-4462-AN
Dimensions:50 x 2.1 mm ID
Elution Type:Gradient
Elution A:0.1% Formic acid
Elution B:0.1% Formic acid in acetonitrile
Gradient Profile:
Step No. Time (min) Pct A Pct B
1 0 60 40
2 3.5 0 100
3 3.51 60 40
4 6.5 60 40

Flow Rate:400 µL/min
Col. Temp: ambient
Detection: Mass Spectrometer (MS) @ amu (22°C)
Detector Info: AB Sciex API 3000™

Source: Cur-11, CAD-12, IS-4500, Tem-450, NEB-12
Dwell: 25ms
Polarity: Positive
Note:SecurityGuard™ ULTRA Guard Cartridge System extends column lifetime.
- SecurityGuard ULTRA Cartridges, UHPLC C18 for 2.1mm ID Columns, 3/Pk Part No.: AJ0-8782
- Holder Part No.: AJ0-9000

Analyte Details

Analyte Detail not available