For security purposes
FOR SECURITY PURPOSES - because Internet Explorer is no longer supported by Microsoft, we suggest that you interact with our secure site through one of our supported browsers - Google Chrome, Firefox, or MS Edge. If you continue to use this website with Internet Explorer you do so at your own risk and you may encounter problems.
Applications
Q1 Scan showing sample cleanliness of Oral fluid SPE from ntercept buffer using Starta-X-C cartridge
24536
Separation Mode: Reversed Phase
Reversed Phase
C18
HPLC

Q1 Scan showing sample cleanliness of Oral fluid SPE from ntercept buffer using Starta-X-C cartridge

Analytes
1 Intercept-i2 Oral Fluid devise
Details
LC Conditions (App ID: 24536)
Column:
Brand Name:
Kinetex
Part No:
Phase Name:
C18
Sample Note:
SPE Product: Strata-X-CW, 30 mg/3 mL cartridge Part# 8E-S035-TBJ Sample pre-treatment Transfer 1 mL oral fluid collected on an applicator tip in its preservative buffer (Intercept). Leave it for 2 hours followed by centrifugation for 15 mins at 600g. Remove 0.5 mL of supernatant to combine with 1 mL 1% formic acid, mix/vortex 5-10 secs to load on Strata X-CW  30mg/3 mL cartridge. Condition: 1 mL Methanol Equilibrate: 1 mL DI Water Load: Combine 0.5mL of pretreated sample with 1 mL 1% formic acid, mix/vortex 5-10 sec and load Wash 1: 1 mL 1% Formic acid/DI Water Wash 2: 1 mL DI Water Dry Down: 5-6 minutes at maximum vacuum (20" Hg or higher) Elute: 2 x 500 µL methylene chloride/Isopropanol/30% Ammonium Hydroxide (80:18:2) Dry Down: Evaporate to dryness under gentle nitrogen and 45-50°C. Reconstitute: With 167 uL initial mobile phase SPE Product: CEREX OFX 3mg Part# 633-003I NBE, 96 well NBE plate 3mg/1Ea Sample pre-treatment Transfer 1 mL oral fluid collected on an applicator tip in its preservative buffer (Intercept). Leave it for 2 hours followed by centrifugation for 15 mins at 600g. Remove 0.5 mL of supernatant to combine with 0.3 mL 0.1M HCl, mix/vortex 5-10 secs to load on SPEware cartridge Condition: 500 uL methanol Equilibrate: 500 uL water Load: Sample from pre-treatment step Wash1: 700 uL 0.1M HCl Wash2: 2x0.8 mL D.I. water Dry: 10 mins under 45050 psi Elution: 300 uL of Dichloromethane:Isopropanol: 30%ammonium hydroxide (80/18/2) Drydown: Evaporate to dryness under gentle nitrogen and 45-50°C. Reconstitute:167 µL initial mobile phase
Similar Applications
search
No Data