For security purposes
FOR SECURITY PURPOSES - because Internet Explorer is no longer supported by Microsoft, we suggest that you interact with our secure site through one of our supported browsers - Google Chrome, Firefox, or MS Edge. If you continue to use this website with Internet Explorer you do so at your own risk and you may encounter problems.
Documents
Application of EPA Method 545 for the Quantitation of Anatoxin-a and Cylindrospermopsin in Water Samples
In this technical note, a simple, robust, reproducible, and rapid sample preparation was used to meet the requirements of the EPA Method 545. A Luna Omega 3 µm Polar C18 column was used to develop a chromatographic gradient that showed good retention from the void volume and achieved analyte baseline separation, while the sensitivity of the SCIEX QTRAP 4500 system enabled Limit of Quantitations (LOQs) of 0.10 ng/mL for Anatoxin-a and 0.20 ng/mL for Cylindrospermopsin.

Application of EPA Method 545 for the Quantitation of Anatoxin-a and Cylindrospermopsin in Water Samples

In this technical note, a simple, robust, reproducible, and rapid sample preparation was used to meet the requirements of the EPA Method 545. A Luna Omega 3 µm Polar C18 column was used to develop a chromatographic gradient that showed good retention from the void volume and achieved analyte baseline separation, while the sensitivity of the SCIEX QTRAP 4500 system enabled Limit of Quantitations (LOQs) of 0.10 ng/mL for Anatoxin-a and 0.20 ng/mL for Cylindrospermopsin.
Document Type:
Technical Notes
Brands:
Separation Modes:
Reversed Phase