Product Information
Phase Detail
Strata C18-E SPE Products
Strata C18-E Solid Phase Extraction (SPE) sorbent is a reversed phase C18 sorbent that can be used to separate hydrophobic compounds
Strata C18-E SPE Products
Strata C18-E SPE Products
Strong Hydrophobic Retention Solid Phase Extraction (SPE)
Strata C18-E is a silica-based end-capped C18 solid phase extraction (SPE) sorbent that offers strong hydrophobic retention with negligible secondary polar interactions from active silanol groups. Strata C18-E can be best used for extraction of hydrophobic or polar organic analytes from aqueous matrices. In addition, Strata SPE sorbents are manufactured with the highest purity and extensively tested to give clean extracts.
Surface Area (m²/g) 500 |
Separation Mode Reversed Phase |
Pore Size 70 |
Particle Size 55 |
Recommended Use Extraction of hydrophobic molecules |
Available Formats
96-Well Plates
1, 3, and 6mL Tubes
Giga Tubes (12-150mL Tubes)
On-line Extraction Columns and Cartridges
Starting Method
Strata Reversed Phase
Condition
1 mL Methanol
|
Equilibrate
1 mL DI Water |
Load
Pretreated sample |
Wash
1 mL 5% Methanol in DI Water, dry under vacuum for 2-5 min |
Elute
1 mL Methanol |
|
Based on 100 mg/1 mL sorbent mass. The above is a convenient starting point for SPE
method development, further optimization may be required to tailor the method for your
specific extraction needs. |
Headquarters
411 Madrid Avenue, Torrance, CA 90501
t: (310) 212-0555 f: (310) 328-7768
Stay up to date on the latest from Phenomenex
